Автомобиль » 22,000 Honda Shadow 750 motorcycles recalled [UPDATE]

22,000 Honda Shadow 750 motorcycles recalled [UPDATE]

22,000 Honda Shadow 750 motorcycles recalled [UPDATE]

RECALL Subject : Engine Stall from Loss of Sensor Signal Report Receipt Date: DEC 23, 2015
Potential Number of Units Affected: 22,142 Manufacturer: Honda (American Honda Motor Co. ) Honda (American Honda Motor Co. ) is recalling certain model year 2012-2014 VT750CA, VT750C2 and VT750C2F, 2011-2016 VT750C, 2013-2016 VT750CS, 2010-2016 VT750C2B and 2013-2014 VT750C2S motorcycles. Engine vibration may cause the bank angle sensor wire to rub on the wire harness joint connector, resulting in a loss of the sensor signal. Without the bank angle sensor signal, the engine may stall while riding, increasing the risk of a crash. Honda will notify owners, and dealers will relocate the joint connector and replace the bank angle sensor, free of charge. The recall is expected to begin February 19, 2016. Owners may contact Honda Motorcycle customer service at 1-866-784-1870. Honda's number for this recall is JW7. Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www. safercar. gov. American Honda Statement on VT750 Recall Honda has issued a Safety Recall of some 2010-2016 model-year VT750 motorcycles. It is possible that long term exposure to engine vibrations may cause the bank angle sensor wiring to break, or be damaged, which could cause the engine to stall and increase the risk of a crash. The safety of our customers is and always will be our top priority. As a result, we are very proactive when it comes to identifying potential issues and correcting them. We are contacting all owners of affected motorcycles to inform them of the recall and advising them to have a Honda dealer replace the bank angle sensor with an updated part. There is no charge, and the work takes approximately one hour to complete.


Update: matter on a remember is now embedded below. The Basics: Honda will remember 22,142 examples of a 2010-2016 VT750 Shadow, including a 2012-2014 VT750CA, VT750C2 and VT750C2F; 2011-2016 VT750C; 2013-2016 VT750CS; 2010-2016 VT750C2B; and 2013-2014 VT750C2S. The Problem: Engine quivering can means a handle for a bank angle sensor to massage opposite a corner connector on a handle harness. This can eventually means a detriment of a signal, and a engine could stall. Injuries/Deaths: None reported. The Fix: Dealers will reinstate a bank angle sensor and pierce a corner connector. If You Own One: Honda expects a remember to start Feb 19. More Information: Documents from a ( ) news Honda perceived 5 claims and 5 margin reports about this emanate as of Dec 14, 2015. Related Video: RECALL Subject : Engine Stall from Loss of Sensor Signal Report Receipt Date: DEC 23, 2015 Potential Number of Units Affected: 22,142 Manufacturer: Honda (American Honda Motor Co. ) Honda (American Honda Motor Co. ) is recalling certain indication year 2012-2014 VT750CA, VT750C2 and VT750C2F, 2011-2016 VT750C, 2013-2016 VT750CS, 2010-2016 VT750C2B and 2013-2014 VT750C2S motorcycles. Engine quivering might means a bank angle sensor handle to massage on a handle strap corner connector, ensuing in a detriment of a sensor signal. Without a bank angle sensor signal, a engine might case while riding, augmenting a risk of a crash. Honda will forewarn owners, and dealers will immigrate a corner connector and reinstate a bank angle sensor, giveaway of charge. The remember is approaching to start Feb 19, 2016. Owners might hit Honda Motorcycle patron use during 1-866-784-1870. Honda s series for this remember is JW7. Owners might also hit a National Highway Traffic Safety Administration Vehicle Safety Hotline during 1-888-327-4236 (TTY 1-800-424-9153), or go to www. safercar. gov.


American Honda Statement on VT750 Recall Honda has released a Safety Recall of some 2010-2016 model-year VT750 motorcycles. It is probable that prolonged tenure bearing to engine vibrations might means a bank angle sensor wiring to break, or be damaged, that could means a engine to case and boost a risk of a crash. The reserve of a business is and always will be a tip priority. As a result, we are really active when it comes to identifying intensity issues and editing them. We are contacting all owners of influenced motorcycles to surprise them of a remember and advising them to have a Honda play reinstate a bank angle sensor with an updated part. There is no charge, and a work takes approximately one hour to complete. This entrance upheld by a Full-Text RSS use if this is your calm and you re reading it on someone else s site, greatfully review a FAQ during fivefilters. org/content-only/faq. php#publishers. Honda recalls 22,000 Shadow motorcycles due to faulty bank angle sensor Employees work on the assembly line at the Honda Motor Co. plant in Manaus, Brazil, on Wednesday, April 9, 2014. Honda Motor Co. , the world's largest motorcycle maker, targets expanding deliveries of motorcycles to 25 million units by March 2017 from 15 million in the period ended March this year. (Photo : Photographer: Paulo Fridman/Bloomberg via Getty Images) Honda, along with the National Highway Traffic Safety Administration, announced the recall of 22,142 Shadow motorcycles, with model year from 2010 to 2015. The reason for the recalls are bank angle sensor wires rubbing against joint connectors that might lead to accidents. reported that Honda found out that the bank angle sensor wire and the joint connector harness wire could rub against each other due to engine vibration and inefficient positioning of the parts.


The rubbing could cause sensor malfunction and the loss of signal. If this happens, the engine might stall while on the road, which will increase the possibility of a crash. According to, the models that will be recalled includes the 2012-2014 VT750CA, 2011-2016 VT750C, VT750C2 and VT750C2F, 2013-2016 VT750CS, 2013-2014 VT750C2S, and 2010-2016 VT750C2B. These models could be the Aero, Phantom, and the ace. wrote that Honda will start the recalls on February 19. The auto manufacturer will replace the faulty bank angle sensors and properly position the joint connector for optimum effectively. So far, there are no injuries or deaths reported yet. As of December 14, 2015, according to the NHTSA, Honda already got five warranty claims and five field cases involving the issue. Honda said that there were no adequate warnings given to the Shadow customers. This is why the auto company opted to have those motorcycles inspected by authorized dealers. Honda notified the dealers and prohibited the sales of the Shadow bikes before they got inspected and repaired. The original equipment manufacturer has developed an updated and safer version of the bank angle sensor. The dealer will use it to replace the current parts in the motorcycles. These dealers will also properly relocate the joint connectors. Both these operations will be given to the customers free of charge. Honda told dealers that even if some motorcycles were already recalled in the past, the current recall must still be followed. This is to ensure the safety of the riders. В Copyright 2016 VCPOST. All Rights Reserved.

1
Сейчас на сайте
Новости партнеров